More Filters
This has a carb that all I find identification is RUI ING stamped in it. Anyone know what it is. Does the primer bulb hose go down to the bottom of the tank? Also what is the inlet needle valve setting? It will start but will not take the throttle. I don't know what kit it will take nor the high / low settings for the carb.
Good day gentlemen, first I would like to say hi and thanks for any help I am about to receive. I have a Mcculloch ms1838av . I picked this up from a friend who said it was not running . It's a very clean saw and doesn't have much use on it. I initially tries to start it and no success. Fuel lines were shot. I replaced all fuel lines gave it a pump and she actually started after some pulls. It ...
A little noodling this afternoon with my 462. It s hot but I was already working outside mowing the lawn after work so I grabbed the saw and log splitter. Got a 1/3 cord of white oak split and stacked.
Govt Seized Car Auctions 95% Off Seized Cars, Trucks & SUV's US Most Trusted Source, See Why! SACCAR.org
Looking for a service manual for a ps 9000 or a ps 9010. Any help would be great. Thanks
I lost spark on this saw. Removed the coil & cleaned the contacts. They ere not really dirty. However the flywheel has the "lining" tore up. See pic attached. I put it back together & it fired up. I did remove some of the loose "lining". Could that have caused the lack of spark?
I am working on my echo PB 8010. It has a walbro WYAB 1 carb. Is the low speed adjustment screw up top down threw the throttle shaft? And the high speed on the side near the fuel inlet nipple? Maybe i got it backwards. I know they are both the small d.
I have a buddy that lives about an hour away, He s taking down about 10 cedar trees. He sent me this pic, looks like some beautiful stuff. Without having a mill, What can I do with these?
over a month agoBowleys Quarters, MD+15 milesLocal AnnouncementsReport Listing
Help needed to purchase a Homestead or small farm home for the holidays.
Looking for the service manuals for the CS-7310,CS-2511T and there PB-8010. Any help would be greatly appreciated.
RB-45 zama kit for your 55 K20-WAT walbro kit for your 55 K22-HDA walbro kit for your 254,257,262 RK-23HS tillotson kit for your 272/288/2100 K10-HD walbro kit for your 365/371/372 RB-60 zama kit for your 365 with zama C3M-EL2/8 K10-RWJ walbro kit for your 372XT RB-163 zama kit for your 357/359 with C3-EL42 K24-HDA walbro kit for your 357/359 with HDA-199 carb RK-32HS tillotson kit for your 385...
Your Listing Here